An
electric oil pump is also available as an electric motor-driven pump, electric motor-driven transmission system, or electric motor drive transmission.
Electric oil pumps are available in many manufacturing, automotive, and industrial areas.
Well,
electric gear oil pumps are the most
common type of electric oil pump. They use gears to create a high-speed transfer of fluid from one point to another—often found in industrial applications. Still, they are also available for small motors and other applications.
Also, read: Industrial Canister Filters
What is an Electric Oil Pump?
Electric oil pumps are a type of electric machinery in various industrial applications. They transfer fluids from one place to another, such as oil from the source to the tank or vice versa. They are also for various industries such as food and beverage, dairy, printing and paper, and plastic processing. The electric transfer pump usually connects to the electric motor through a gearbox.
Must read: Types Of Industrial Filtration
Why Should You Choose Electric Gear Pump?
There are two types of gear pumps: single-stage and multistage gear pumps. Single-stage gear pumps have only one stage; they do not change the direction of rotation to pump fluid at different rates through different parts of the system. Multistage gear pumps have more than one stage; they change the direction of rotation to generate a flow rate through other parts of the system.
Must read: Automatic Grease Lubrication
Importance of Electric Oil Pump
Electric oil pumps are important for several reasons:
- Firstly, it helps save energy that comes in use for other purposes.
- Secondly, it reduces pollution by not using any fuel or gas which could otherwise be burned.
- Thirdly, it prevents damage to the environment by not using any chemicals or fuels which would harm soil, water, air quality, etc.
- Finally, it saves cost by being cheaper than its counterpart – gas-powered ones!
Electric Oil Transfer Pump Process
The electric motor spins the gearbox shaft, which then connects with another shaft inside a housing containing an impeller on its inner surface facing outwards towards the pumping fluid (i.e., inwards). This shaft rotates continuously around an axis. It has many advantages and features, such as easy maintenance and operation and high efficiency.
[Also read: Hydraulic System Filter]
Oil pumps usually exists because of metal materials such as steel, aluminum alloy, stainless steel, etc. They are mainly for transportation, chemical processing, food processing, oil refining, etc.
There are
three types of electric oil pumps:
continuous-duty electric oil pumps (CDEP),
intermittent-duty electric pumps (IDEP), and
permanent-duty electric oil pumps (PEDEP). The main difference between them is that the latter two can work continuously for a long time without interruption; however, they only have one type of output shaft rotation speed (slowly rotating).
Also, know about Types Of Lubricants.
Electric Oil Pump: What is it and Why Use It?
Electric oil pumps come in use for many industries, including the automotive industry. They are very important for many reasons, including:
- They are more efficient than traditional gear pumps. This means that they use less power to move the same amount of oil.
- They are easier to maintain than traditional gear pumps because there are no moving parts to worry about breaking down!
- The electric oil pump has become very popular recently because it allows for greater automation and efficiency than traditional manual pumps. It is much easier to clean and maintain than an internal combustion engine-powered unit.
Also read: Oil Filtration And Its Benefits
In-depth Electric Oil Transfer Pump Process
Electric oil pumps use an electric motor to turn the gears inside their housing, which results in them being able to move much more fluid than their traditional counterparts. The motor attaches itself directly to the drive shaft, meaning no belts or chains are used; instead, it uses direct current electricity that powers everything up until it reaches its maximum rating before stopping entirely.
[Also, read about Grease Lubrication]
Electric transfer pumps transfer oil by using gears instead of shafts. They are also more efficient than mechanical transfer pumps because they use less power. This makes them ideal for large-scale industrial applications where they need to move large amounts of fluid quickly and efficiently.
They are also durable and reliable compared to mechanical transfer pumps that can break down quickly if not consistently maintained or maintained properly throughout their product’s life cycle.
Also read about the Importance Of Industrial Oil Filtration.
Conclusion
Electric oil pumps transfer liquids from one point to another in an efficient manner without contaminating the product being transferred. This makes them ideal for applications such as food processing plants and pharmaceutical companies where contamination of the product being processed is an issue, and for the automotive industry where engine starting, idling, and throttling needs its performance.
[Also read: Portable Filter Carts]
With the increasing need of automobiles across the world, the demand for oil and other petroleum products is also rising. However, because of the rising cost of oil, automobile manufacturers are looking for alternatives that can benefit them.
Electric oil pumps are one of the alternatives that are helping automobile manufacturers save on oil. For more information, visit our
Micro-Lube website.
