Things To Remember About Hydraulic System Filter. Worth The Money & Time?

When considering a new hydraulic system filter for your turbine, it is important to know what filters you should use. In this article, we will discuss how a turbine hydraulic system filter works, what purpose it serves in the system and its placement within the rest of the components.

What Is a Hydraulic System Filter?

A hydraulic system filter is an important component of any mechanical system that uses liquid to move fluids through tubing or pipes. The fluid passes through it before entering the next component or destination within the system. The fluid then enters one end of the filter. It exits at another end after being filtered by other components in the pipeline or pipe. Turbine hydraulic system filters have designs to remove particles from the flow of the hydraulic fluid. The hydraulic fluid moves the turbines, which propel the pump. Flexible hoses connect the turbine and pump.


A filter in a hydraulic system aims to reduce or remove sediment and particulate matter that become trapped in the system. These particles might be small enough to pass through the filter but large enough to cause blockages if they accumulate. Filters are therefore used to prevent this accumulation before it occurs. There are several types of hydraulic system filters, including turbine, hydromechanical and electro-mechanical. The purpose of each filter is to remove specific contaminants from the fluid. Turbine hydraulic system filters remove sediment and other particulate matter from the fluid. This type of filter is typically used in large, high-pressure systems with many moving parts and little opportunity for contaminants to settle out. Hydromechanical and electro-mechanical filters use an electric field to pull water through a porous material treated with chemicals. These filters can also be used on small engines or pumps. Hydraulic system filters are used to help remove impurities and contaminants from the hydraulic system. These filters can be found in turbomachinery, such as turbines.

In A Turbine

In a turbine, the hydraulic system is responsible for generating power while moving fluids through the system. The hydraulic system also provides a return path for the water that exits the turbine. The different types of filters used in this part of the machine are:
  • Static pressure filter: This filter removes impurities from a fluid before it enters an area where it will be used. This can include removing particles from fuel or oil for example.
  • Hydraulic Oil filter: Oil filters removes particles from oil before entering other parts of your engine’s hydraulic system (like transmission or power steering).
  • Air filter: Air filters removes particles from air before entering other parts of your engine’s hydraulic system (like transmission or power steering).


Both types of filters are important to make sure your equipment is operating at its best efficiency level, so your manufacturer’s warranty will be valid when needed most! Hydraulic system filters remove solids and other impurities from the hydraulic fluid. And these filters can be either mechanical or electronic, but most are electronic. Hydraulic system filters are in the hydraulic system and must be maintained by an authorized service facility. The service facility should be able to provide the proper maintenance for your specific model of hydraulic system filter.

Several different filters can be used in hydraulic systems

These include:
  • Pump Filters: These are placed in front of pumps and help filter out particles that have gotten past the primary filter. They also help reduce wear on the pump shaft and seals.
  • Oil Separators: These are placed after the pump but before the main filter to prevent oil from mixing with water as it moves through the system.
  • Main Filter: The main filter is where all the dirt or debris collected by other filters is removed from the system before it enters your final use area (like a machine tool).


A hydraulic system filter is a component of a hydraulic system that removes foreign matter, dirt, and other debris from the hydraulic fluid. It is typically located at the inlet of the pump or the outlet of the pump. A filter can be a disposable or reusable component. Contact us if you think you need to something else about hydraulic system. Our related blogs:  Oil Filtration, Its Types, Benefits And Importance, Uses Of Oil Filtration In Mining & Its Role, Know About Importance Of Industrial Oil Filtration
Contact us